DC-21

Technische spezifikation:

Dual-channel vibration analyzer DC-21 Accelerometer Accelerometer magnet Accelerometer cable - 1.5m Accelerometer cable - 5m Photoelectric probe FD-2 Cable for FD-2 (1.5m and 10m) Magnetic stand for FD-2 PC interface cable Charger Strap case for DC-21 Built-in balancing program DC-21 Charging Program (Firmware) Vibro 12 software DC-21 bag and accessories Instruction manual Verification methodology Description of Vibroanalyzer DC-21 General description: • Graphic display 320x240 pixels, 80 x 60mm with backlight; • Membrane keyboard; • Data exchange port; • Ability to work with diagnostic software for machines; • Ability to reload (update) the software securing the device; • Built-in auto-test and calibration function; • Built-in help system (Help); • Operating temperature range -20 / +50 0С; • Weight 0.8 kg; • Dimensions 109x206x35mm • Power supply: battery, continuous operation time up to 8 hours, recharge time up to 2.5 hours. • dust and moisture resistant Technical capabilities: • Measured values ​​- vibration acceleration (from 0.05 to 1000 m / s2), vibration speed (from 0.1 to 100 m / s), vibration displacement μm) • Type of sensors: ICP accelerometer for analog inputs; Infrared photo sensor for sync input; • Frequency range from 0.5 to 25600 Hz; • Number of inputs: Analog - 2 pcs .; Synchronization - 1 pc .; For data exchange with PC - 1 pc. • Frequency bands for measuring at the general level according to ISO 10816 from 10..1000 and 2..1000 Hz • Additional frequency bands: 2..200, 3..300, 5..500, 10..5000, 500..2500, 625..1250, 1200..2500, 2500..5000, 5000..1000, 10000..25000, 17000..25000 Hz • Spectral analysis: Limit frequencies 25, 50,100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 Hz; • Spectral lines - 400, 800, 1600; • Dynamic range 70dB • Bandpass filters for signal envelope analysis: 1/3 octave: 800, 1000, 1250, 1600, 2000,2500, 3200, 4000, 5000, 6400, 8000, 10000, 12800, 16000, 20000 Hz 1/1 octave: 8000, 16000 Hz • Data exchange by serial port; built-in “Help” system; identification of measuring points. Functionalities: • Time signal measurement (oscilloscope function); • Detector of rms value, peak, peak-peak (range), peak factor; • Spectral analysis of the signal; • Signal envelope spectrum; • Speed ​​from 30 to 105,000 rpm; • Amplitude and phase of the balancing signal; • Amplitude-frequency characteristic during start and stop simultaneously on the two channels and two harmonic components; • Balancing of rotors; • Ability to perform both route measurements and of additional measurements beyond those specified in the route map

Wir verkaufen nur neue und originelle Produkte!