ZVB 200.1-4.5-AC

Zellenradschleuse

Technische spezifikation:

based on factory no. 97027 Product PP Granules (Acceptance) bulk density min. 500 kg/m3, max. 600 kg/m3 grain size min. 3 mm allowance Temperature max. 60 °C Characteristics good flowing, non-abrasive, dry Atex zone inside: without outside: without Product feed for dispending granular products Output 1,500 kg/h interpretation C6.0 volume 4.5 dm3 Filling level (estimated) 45% Rotation speed: 29 rpm Casing design: hard-coated cast aluminium Basic lock AC drilled according to DIN EN1092-1 PN10/ANSI 150 lbs Flanges: Inlet: DN 150/6", Outlet: DN 150/6" Mechanical design pressure: 1.5 bar Side panel side cover: Cast aluminium Top pressure max. 1.0 bar Pressure down max. 1.0 bar differential pressure max. 1.0 bar Leakage gas outlet leakage gas outflow on the housing via leakage gas nozzles with pipe connection DN 40 Material: Stainless steel Gasket Kit, Shaft Seal WN: NBR Cell wheel: Stainless steel 1.4541/AISI 321 Chain actuator completely assembled, for helical gear motor with chain, ratio 1:2 Motor Helical Gear Motor SEW R27DRN71M4 0.37kW 58rpm Non Ex - Voltage: 230/400V 50Hz - fixed speed (50Hz) - Degree of protection IP 55 Operating Instructions Operating Instructions () Dimension sheet (default) Certificate Acceptance 2.2 Factory acceptance EN 10204-2.2: Certificate Certificate Material 2.2 Material EN 10204-2.2: Twist Part, Side Cover and Housing Certificate Conveyor Inlet Optional: Conveyor inlet SS: stainless steel 1.4541/AISI 321 for fluid group 2 Inlet: fixed flange stainless steel 1.4541/AISI 321, according to DIN PN 10 Tube: Free ends, Conveyor Pipe Diameter: 76.1 x 2.6 (please check further diameters on request policies The specified scope of delivery complies with all valid and applicable EC/EU directives. Especially with regard to the Machinery Directive 2006/42/EC, the component corresponds to a incomplete machine with explanation of installation. compressed air Required is purified and anhydrous quality at the specified pressure for which Wave flushing of the locks in addition in oil-free quality. When flushing the wave, the supply pressure must be higher than the respective maximum system pressure (pmax). rotary valves < 1,5 barg design: pmax +0,5 bar, Zellenradschleusen > 1.5 barg design: Pmax +1.0 bar. varnishing Steel parts RAL 9006, chrome nickel steel, galvanized and aluminium parts without coating. Geared motor RAL 7031. ambient Temperature: The permissible standard ambient temperature for rotary valves, switches and for sliders incl. motor and electrical attachments is minimum -10°C and a maximum of +40°C. Site: All engines are limited to a maximum installation height of 1000 metres. Technical note Since we are not fully aware of the application (see technical specification), we can use not guarantee for the specific application, but only for professional execution of the components.

Wir verkaufen nur neue und originelle Produkte!